Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Beverly?
Garage door work in Beverly typically runs $150 – $600 for most repairs, with spring replacement at $180 – $340 per spring, and a new door installation at $700 – $2200. The job you’re calling about decides which end of that range you land on. A grinding opener and a snapped torsion spring are very different days in the shop, and the written estimate you get on site sets the final price.
We’re a garage door specialty company, nothing else. Our technicians have up to 14 years of experience, and we know the eight brands you actually own: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Whatever is hanging over your car, we’ve worked on its cousin. Call (855) 337-2012 for a free estimate. We answer 24/7.
Key takeaways:
- Most garage door repairs in Beverly land between $150 and $600.
- Springs are priced per spring. A matched pair is usually replaced together, so plan on roughly double the per-spring range.
- A new door installed runs $700 – $2200, and a new opener $250 – $550.
- Estimates are free, and the written quote is what you pay.
Garage Door Cost Breakdown (2026)
Garage door work splits into two buckets: repairs to the door and hardware you have, and replacing what’s worn out. Here’s what each of the common jobs runs in Beverly this year. These are typical estimated ranges, not quotes. The written estimate sets the final price.
| Service | Typical estimated range (Beverly) |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (per spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
What pushes a repair toward the top of its range? Multiple failures found on the same visit, a heavier door that needs heavier springs, and older hardware that takes more time to free up and adjust. What pulls it down? A single clear fault, easy access, and a garage where the opener and door have been maintained. Spring pricing gets misread all the time: the range above is for one spring. If yours has two, and most residential doors do, both are usually replaced together because they wear as a matched set, so the pair lands near twice the single-spring figure.
What Affects Garage Door Pricing in Beverly
Quotes vary between two houses on the same street, and it’s rarely down to the company. Here’s what actually moves the number in Beverly.
- Door size and weight. A single-car door uses lighter springs than a double-car door, and the spring is where a lot of the cost sits. Heavier doors need heavier wire gauge, and that’s a cost difference you can’t see but will pay for.
- Number of springs. Spring work is priced per spring, and most residential doors in Beverly use a matched pair. Budgeting for one when you need two is the most common surprise we see.
- Brand and part availability. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we already know the part numbers and settings for each. A door from a brand nobody recognizes can mean a longer search for compatible hardware.
- Condition of the opener. A worn logic board or stripped gear calls for different work than a misaligned safety sensor. Opener repair ranges from $120 to $320 depending on what’s inside.
- Whether the door needs alignment. A door that came off its track after a hit or a sudden spring failure may need track realignment ($120 – $240) alongside the original repair.
- Repair versus replace. A single bent panel is a $250 – $500 fix. When the door, springs, and opener are all at end of life at once, a new installation at $700 – $2200 may make more sense than stacking repairs.
How repair and replacement pricing compare in Beverly
A repair is almost always cheaper than a replacement, but the math shifts once the door has more than one big problem. A single spring repair at $180 – $340 beats a new door every time. Three panels plus a spring plus a worn opener starts to add up to most of a new installation. The question worth asking yourself is simple: is this door going to keep taking money, or is one bigger spend going to stop it?
If you’re on the fence, a technician can look at the door, the springs, and the opener together and tell you honestly which side of that line you’re on. That’s free to find out.
How much does a garage door spring repair cost in Beverly?
Spring repair in Beverly typically costs $180 – $340 per spring. A matched pair is usually replaced together, so a pair costs about twice that range, roughly $360 – $680. Springs are the safety-critical part of any garage door; they hold the door’s weight under heavy tension, and a failed torsion or extension spring can release that tension without warning. We treat spring work as a specialty with the right tooling and proper tension management, not a quick swap. If your door came down hard or won’t lift, keep it closed and call us at (855) 337-2012 for a free estimate.
How much does a new garage door cost in Beverly?
A new garage door installed in Beverly runs $700 – $2200, depending on door size, material, and whether the opener needs replacing at the same time. Add $250 – $550 if you’re installing a new opener. Most of the price lives in the door itself, not the labor, and a heavier insulated door sits near the top of the range while a basic single-car door sits lower. The estimate you get lays out the door, the hardware, and the opener separately so you can see where the money is going. Call (855) 337-2012 and we’ll walk through options built around your door’s opening and the brand you’re used to.
How much does an opener repair cost in Beverly?
Opener repair in Beverly typically costs $120 – $320. What’s inside the unit drives the range: a stripped gear, a failed logic board, a worn belt, or a safety sensor that won’t hold alignment all land in different parts of that spread. LiftMaster and Chamberlain systems (including the myQ ecosystem) are the units we see most on newer homes, while Craftsman and Genie setups are common on older ones. We work on all of them. If the door won’t respond and you can’t get the car out, that’s an urgent call. Call (855) 337-2012 for a free estimate.
What happens when you call
A garage door is your home’s largest moving part, and when it stops working it doesn’t politely wait for a convenient week. When it’s urgent, we move urgently. A door stuck open overnight or stuck shut when you need to leave gets treated as urgent, not pushed to next week. Same-day service is available.
The phone line is answered 24/7, and we dispatch seven days a week, Sunday through Friday, from 7am to 7pm. We’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. The estimate is free and there’s no separate diagnostic or trip fee, so the number you get on the written quote is the number you pay for the job.
How to save on garage door work in Beverly
Garage door pricing isn’t a fixed sticker, and a few sensible choices keep it down without cutting corners.
- Fix the one thing before it becomes three. A noisy roller or a squeaking hinge is $110 – $220 to sort out. Waiting until it wears the track and strains the opener turns that into a bigger bill. Small, early repairs are the cheapest jobs we do.
- Replace both springs when they’re matched. Replacing one spring of a pair that were installed together usually means the second fails soon after. Doing both at once saves the second call and the labor.
- Ask about the opener while you’re at it. If it’s already showing its age, checking it during a spring or cable repair can catch a failing part before it leaves you stranded.
- Keep it lubed and balanced. A door that runs smoothly puts less strain on springs and opener. A little periodic attention goes a long way.
- Get the free estimate in writing. You should know the price before anyone picks up a wrench. Call (855) 337-2012 and we’ll give you a written estimate up front.
Why the brand on your door matters for pricing
We’re factory-familiar with eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters for your wallet because brand knowledge is what stops guesswork from turning into extra labor. We know Clopay panel tolerances and LiftMaster logic-board behavior, so we’re not ordering a part to find out it doesn’t fit. We work on the brand you already have, whether that’s a modern myQ-equipped opener or a Craftsman unit that’s been quietly doing its job for two decades.
It also means one company handles the diagnosis, the parts, and the install across all of them. No referrals out, no subcontractor waiting on a different supplier. Princeton Garage Door Repair Pros covers the whole life of the door: repair, spring and cable work, opener repair, panel and hardware replacement, and complete new-door installation.
When a repair makes more sense than a new door
Most of the calls we take end in a repair, not a sale of a new door, and that’s how it should be. A door with solid panels and a working opener doesn’t need replacing because a spring broke. Here’s the rough guide:
- Repair: a single failed spring, a snapped cable, a bent track, worn rollers, an opener with one clear fault, one or two damaged panels.
- Replace: panels that are rusted through or cracked across several sections, a door that’s been repeatedly hit and won’t stay aligned, hardware so worn that the tracks and hinges all need replacing at once, or a door with an opener that’s at end of life and a spring that’s already gone.
If the cost of stacking repairs starts to approach the cost of a new door at $700 – $2200, replacement is the smarter spend. A technician will tell you which side of that line you’re on, and the estimate is free either way.
FAQ: Garage door cost in Beverly
How much does garage door repair cost in Beverly?
General garage door repair in Beverly typically costs $150 – $600, depending on what’s wrong and how many parts are involved. A single cable or roller fix sits near the bottom; multi-part work with springs and tracks sits higher. Call (855) 337-2012 for an exact quote; estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper than replacement. A spring repair at $180 – $340 per spring or a panel swap at $250 – $500 costs a fraction of a new door at $700 – $2200. Replacement only wins when the door has several major problems at once. Call (855) 337-2012 and we’ll tell you honestly which way to go.
Can you come today?
Same-day service is available, and urgent jobs like a door stuck open or stuck shut are treated as urgent. We answer the phone 24/7, and dispatch runs Sunday through Friday, 7am to 7pm. Call (855) 337-2012 and we’ll get you on the schedule.
How much does a new garage door opener cost in Beverly?
A new opener installed in Beverly typically costs $250 – $550, while repairing an existing opener runs $120 – $320. If your current unit has one clear fault, repair is usually the better call. Call (855) 337-2012 for a free estimate and we’ll compare the two for you.
Do you charge for the estimate?
No. The estimate is free. We look at the door, the springs, and the opener, and give you a written price before any work begins, and that written estimate sets the final price. Call (855) 337-2012. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get a free estimate on your Beverly garage door
If your door is grinding, sticking, hanging crooked, or just old enough that you’re budgeting for what comes next, the fastest way to get a real number is to call. One company, one specialist, all the major brands. Whether it’s a $130 cable repair or a full new door installation at $700 – $2200, you’ll know the price before we start.
Call (855) 337-2012 for a free estimate on your garage door in Beverly. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. When it’s urgent, we move urgently.
Pricing reflects the Beverly market as of 2026. Princeton Garage Door Repair Pros offers free estimates, call (855) 337-2012.
Written by the team at Princeton Garage Door Repair Pros.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Sofia Martinez"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Darnell Grant"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Jessica Lin